
Ford Commercial Service and Fleet Maintenance near Grand Blanc, MI
Downtime costs money, which is why our Commercial Vehicle Center teams every repair decision with uptime-first thinking. From diesel Super Duty trucks and Transit vans to Medium Duty chassis, shuttle buses, cutaways, and many RVs, we maintain the bays, tooling, and certified technicians to keep your vehicles earning. Our large-bay shop was designed for work vehicles — wide door clearances, tall ceiling height for high-roof Transits, and heavy-duty lifts that safely accommodate dual-rear-wheel F-450 and F-550 chassis cabs with service bodies. We pair that capacity with Ford Pro Service processes, priority scheduling, extended hours, and Mobile Service options for preventive maintenance and many light- to mid-level repairs at your site.

Commercial vehicle owners value speed with accuracy, so our advisors build clear repair plans and communicate by text, phone, or email — whatever fits your workflow. For diesel fleets, we combine Ford IDS/FDRS diagnostics, Power Stroke expertise, and in-stock maintenance parts to accelerate turnaround on common concerns like DPF cleaning, DEF system diagnostics, EGR performance, injector testing, and high-pressure fuel system repairs. If your operation depends on specialty upfits — cranes, liftgates, refrigeration, KUV bodies, plows, or custom shelving — our upfit-savvy technicians understand how those systems interact with factory electrical, charging, cooling, and chassis components. And when recalls arise, our Commercial Vehicle Center capacity enables batch scheduling, VIN pre-checks, parts pre-pulling, and even select remote updates to compress cycle time. When you need to move to the front of the line, ask about First-Bay-Open priority — a program designed to put your fleet in a service bay as soon as one opens, minimizing wait time and maximizing uptime.
Heavy-Duty Bays, Diesel Expertise, and Mobile Service Readiness
- Large-bay capacity: Tall-ceiling service bays and wide doors accommodate high-roof Transits, box-configured cutaways, and many bus and RV applications without disassembly.
- Heavy-duty lifts: Certified lifts handle F-450/F-550 chassis cabs, dual-rear-wheel rigs, utility bodies, and other loaded upfits to ensure safe access underneath.
- Diesel diagnostics: Factory Ford IDS/FDRS tooling, Power Stroke training, and diesel-specific test equipment target issues faster and more precisely.
- Mobile Service coverage: On-site PMs, fluid services, batteries, filters, wipers, software updates, and many recall and light-repair tasks performed at your yard.
- Priority lanes and hours: Commercial-first write-up, extended hours, early-bird and night drops, and First-Bay-Open scheduling to reduce dwell time.

Speed begins with access, which is why our oversized doors, tall ceilings, and heavy-duty lifts are non-negotiables for commercial work. High-roof Transits stay configured, F-550 chassis cabs sit safely on lifts with service bodies installed, and box vans clear doors without creative maneuvering. With that physical readiness, our diesel bench — supported by Ford factory diagnostics — shortens the path from symptom to root cause on 6.7L Power Stroke and other Ford diesel platforms. Add Mobile Service and we can complete many jobs on your lot while your team keeps working, from PM intervals to battery replacements and select recalls. Pair these advantages with commercial-priority write-up, extended hours, and First-Bay-Open scheduling, and you have a service model engineered to turn complex vehicles quickly without compromising repair quality.
Fleet Maintenance, Ford Fleet Care Billing, and Uptime Planning
Fleet maintenance is more than oil and filters — it is a system that coordinates vehicles, drivers, routes, and shop time. We build an uptime plan around your business, mapping PM intervals by duty cycle and mileage, bundling multi-vehicle services to limit trips, and aligning DOT inspections, brake replacements, rotations, and coolant or transmission services with your operational calendar. Our advisors can set up mileage triggers, time-based reminders, or telematics-informed schedules, then reserve blocks so multiple units get in, get done, and get back on route together. For diesel fleets, we plan periodic DPF service, DEF health checks, and fuel filtration changes that reflect your idle time and load profile. For Transit and cutaway vans, we manage tire and alignment schedules to match your weight distribution and stop-start routes, extending tire life while maintaining safe tracking.

Billing should never slow pickup, so we support Ford Fleet Care consolidated invoicing and purchase order workflows to streamline approvals and reconciliation. That means simplified statements, VIN-level detail, and consistent repair coding across your fleet, allowing your accounting team to close books without chasing paperwork. With Pick-Up & Delivery options, early-bird and after-hours drop, and clear digital RO approvals, your driver can drop keys and leave — no waiting. For teams operating near Grand Blanc, MI, our location and Commercial Vehicle Center processes make it easy to schedule block appointments that cut downtime. Lasco Ford also coordinates rentals and loaners when appropriate, plus extended service plans and warranty coverage where applicable, so your vehicles keep moving while our team completes the work.
Upfit Repair, Electrical Integration, and Specialty Equipment Support
- Crane and PTO systems: Verification of hydraulic pressure, load testing, PTO engagement logic, chassis wiring integrity, and body mounts to maintain safety and compliance.
- Refrigeration units: Battery isolators, alternator output analysis, compressor belt alignment, coolant tie-ins, airflow management, and door seal integrity to protect cold-chain performance.
- KUV bodies and shelving: Harness routing, fuse protection, pass-through grommets, strobe and work-light circuits, and switch-panel labeling for reliable, serviceable installs.
- Liftgates and ramps: Power distribution checks, relay and solenoid testing, platform alignment, pivot lubrication, and frame reinforcement inspection to prevent repeat failures.
- Inverters and shore power: Proper grounding, cable gauge verification, RFI mitigation, and load calculations to support tools and tech without overtaxing OEM systems.
- Snowplow packages: Boss and Western controller diagnostics, front-end geometry checks, cooling airflow review, and suspension health to handle seasonal demands.

Upfits turn a vehicle into a tool — and tools must be dependable. Our technicians are trained to think beyond a single component and consider the whole ecosystem: alternator output versus auxiliary draw, battery reserve against idle time, coolant routing and heat rejection with added HVAC loads, and the physical stresses of cranes, plows, and liftgates on frames and steering. We document fuse sizes, relay locations, harness paths, and torque specs so future service is faster and safer. If your high-roof Transit carries shelving, a secondary A/C system, or a generator, we validate airflow, electrical protections, and mounting points to protect both the upfit and the chassis. When those details are managed, drivers avoid limp-home conditions, unexpected no-starts, and premature component wear — and your fleet avoids costly repeat visits.
Frequently Asked Questions:
Do you service RVs, buses, and cutaway shuttles?
Yes — our large-bay facility, tall door clearance, and heavy-duty lifts accommodate many RVs, shuttle buses, and cutaway configurations. Please share dimensions and upfit details when scheduling.
Can you handle batch recalls for fleets?
We pre-check VINs, pre-stage parts, reserve multiple bays, and schedule groups so several vehicles are completed together. Select campaigns can be supported with remote updates when applicable.
What is First-Bay-Open and how does it help?
As a Commercial Vehicle Center, we offer priority placement into the next available bay. This reduces waiting-room time and accelerates diagnosis, especially for vehicles that must return to service quickly.
Which repairs can Mobile Service perform at my yard?
Common on-site work includes PM services, filters, wiper blades, batteries, many recalls, software updates, basic electrical diagnostics, and some brake and lighting repairs. Heavier driveline or lift-required work comes to the shop.
How does Ford Fleet Care simplify my billing?
With consolidated invoicing and standardized repair lines, accounting receives clean statements by VIN and PO. That means faster approvals and quicker key handoff at pickup.
Do you support alternative fuels and biodiesel blends?
We service CNG/LPG prep-package vehicles and B20-capable diesels, including fuel system maintenance, filter intervals, and leak checks aligned with your usage profile.
How quickly can most fleet jobs be turned around?
Routine PMs and many light repairs are same day. Priority scheduling, parts pre-pulls, and Mobile Service further shorten cycle time; complex diesel or upfit repairs are planned to minimize downtime.
Can you align maintenance with DOT and seasonal needs?
Yes — we can bundle DOT inspections, tire rotations, brake service, and seasonal checks (plows, cooling, HVAC) to cut visits and keep your vehicles road-ready.
Keep Your Business Moving — Schedule Priority Service Today
Your team depends on trucks and vans that start, roll, and deliver every day. That is why our Commercial Vehicle Center aligns heavy-duty bays, Ford Pro Service processes, First-Bay-Open priority, and Mobile Service into one seamless support model. Share your fleet roster and operating profile and we will map a preventive maintenance calendar, set up block appointments, and pre-stage parts for high-frequency repairs. While we work, your drivers can leverage Pick-Up & Delivery, early-bird or after-hours drop, and rapid digital approvals to keep routes on schedule.
When recalls arise, we streamline the entire process by pre-validating VINs, scheduling batch visits, and applying remote updates where supported to reduce downtime. For diesel fleets, our Power Stroke diagnostics and test equipment target root causes quickly; for Transit vans and Medium Duty chassis, our tall bays and heavy lifts keep upfit configurations intact for safe, efficient access. If your operation runs high-roof cargo vans, F-550 chassis cabs, or bus and RV applications near Grand Blanc, MI, our facility’s size, tools, and training were built for your vehicles. From cranes and liftgates to refrigeration and KUV shelving, we service the whole vehicle — not just a part. Connect with our commercial advisors to request First-Bay-Open scheduling, book Mobile Service, or set up Ford Fleet Care billing so keys drop and pickup stays fast. Lasco Ford, serving Brighton and Hartland, is ready to keep your business moving with efficient, accurate, and professional service support.
Make an Inquiry
* Indicates a required field
